3D printer epoxy thermal

This product introduces foreign foaming technology, with a uniform foaming density ranging from 0.6 to 0.85, which makes the product soft and lightweight, with good rebound and strong tensile strength. It has the advantages of being odorless, non-toxic, and odorless

[Existing specifications (mm)] 290 * 380 * (5-15) 380 * 380 * (5-15) 400 * 600 * (5-15) 500 * 500 * (2-30) 500 * 600 * (5-15) 600 * 800 * (5-15) 1000 * 1000 * (5-12) 1000 * 1200 * (5-12)

[Special Specification (mm)] Minimum Length: Unlimited Maximum Length: Unlimited, can be made into infinitely long coils Minimum Width: Unlimited Maximum Width: 1200 Minimum Height: 2.0 Maximum Height: 30.0

【 Product Color 】 Red, gray, natural color, white, black can be customized in other colors

【 Main use 】 Suitable for hot stamping equipment, electronic appliances, mechanical sealing and other industries.

【 Main features 】 No odor, uniform foaming, good resilience, high strength, long service life, temperature resistance up to 260 ℃ without deformation. The tolerance for product plane parallelism is ± 0.05mm

Performance parameter indicators:

Type: Open cell foam

Surface: Double sided fabric pattern

Thickness: 2.0-30mm

Tear strength: 55Kn/m

Pressure intensity; 30Mpa

Ductility: 100%

Hardness: 8-50 Shore A

Temperature resistance range: -40-220C

Density: 0.55-0.9g/cm3

Fire rating: 95V-0

Dielectric performance (withstand voltage):>3KV

Dielectric constant: 5.5 KHz

Volume resistance: 1. * 1011 Ohm m m

Thermal conductivity: 0.2-0.3 W/M-K