Heating plate iPad notebook

Product introduction:

Apple iPad screen removal treasure screen removal treasure screen removal heating pad replacement touch screen mobile phone tablet heating separation screen

The screen changing treasure adopts flexible heating material, which is more uniform than the hot air gun, and can quickly soften the rubber surface,

Thus, the screen can be disassembled more safely and conveniently.

Greatly reduce the chance of breaking the screen

Higher screen removal efficiency

Applicable customers: maintenance stores and apple after-sales maintenance stores

instructions:

Usage: (tile the desktop, keep it flat, and place the temperature control knob on the left.)

Change iPad external screen:

First, preheat the metal shell part: adjust the temperature control knob to 60 degrees and face up for about 2 minutes.

Step 2: heat the periphery of the outer screen: turn the front outer screen down for about 2 minutes, turn it over and insert it into the gap of the outer screen with a crowbar or paddle

Check whether the glue surface is softened, and adjust the heating time or temperature according to the actual situation. After the rubber surface softens, adjust the temperature control knob to 0

Or turn off the power supply, keep the glue on the casing in a softened state with residual temperature, and disassemble it.

Reminder: 1 After the adhesive surface softens, do not place the back of the iPad on the heating surface for too long.

2. With regard to adjusting temperature and time, each operator gradually finds a set of steps suitable for himself according to the actual situation.

The temperature and time provided by the company are only for reference.

Product parameters:

Model: khsh2016032501 size: 38cm * 23cm power cord length: 1.5m

Voltage: 220 / 110V / 230V power: 200 ~ 400W

Temperature range: 30 ℃ ~ 110 ℃ [adjustable]

matters needing attention:

Tips for safe use:

Do not bend excessively to avoid damaging the internal heating parts.

The surface of the split screen treasure is insulated, but it is not waterproof. Therefore, do not wash it in water. Stay away from the water source during use to avoid short circuit.

In case of water splashing on the temperature control switch and heating surface, please cut off the power immediately (press the yellow button on the leakage protection plug to cut off the power). Avoid getting close to infants during use to avoid danger.

Do not cut or puncture the heating surface during use to avoid electric leakage.

During the heating process, do not place the iPad on the heating surface for too long to avoid damaging the motherboard and LCD.