Aluminum bonded silica gel heating sheet

The silica gel heater is mainly composed of Ni Cr alloy heating wire and glass fiber reinforced silicone rubber insulating cloth pressed at high temperature. It has the characteristics of fast heating, uniform temperature, high thermal efficiency, high strength, convenient use, long safety life, not easy to aging, can bend and deform the surface of the object, and can evenly convey the heat to every part in contact with the heated object.

Technical parameters:

The temperature range is - 60 ℃ - 250 ℃ for long-term heating. There are two kinds of heating cores: high resistance alloy wire and metal etching foil. The withstand voltage of the insulating layer is 20-50kv / mm2, which can be used safely.

1) Maximum temperature resistance of insulating material: 300 ℃

2) Maximum operating temperature: 250 ℃

3) Insulation resistance: ≥ 500 m Ω / DC 1000V

4) Compressive strength: ≥ ac1500v / 5S

5) Power deviation: ± 5%

6) Max. 1.2m × XM min 15mm × 15mm thick 1.5mm (thinnest 0.8mm, thickest 4.5mm) lead length: Standard 130mm, which can be specially customized beyond the above dimensions.

7) One side of the silica gel heating plate can be bonded to the aluminum plate, so that the heat can be lost to the surrounding ambient air faster and better or transmitted to the heated object, so as to enhance its heat conduction and heat dissipation capacity.

Note: it can be customized according to the voltage, power, specification and product shape required by users (such as oval, cone, etc.).

Installation method: due to different shapes, this product is installed and used by pressing, double-sided adhesive pasting, punching and positioning, room temperature vulcanization and other methods according to the actual site. The safe life is as long as five years