Silicone rubber heating pad mat with aluminum plate

Silicone rubber heating pad mat with aluminum plate, silicone rubber heaters pad, heating mat, heat sheet ,heat panel, heat pad,silicone heating blanket, silicone rubber heater mats,silicone flexible pad heaters,silicone heating strips, silicone flexible heating straps, silicone rubber heat board,silicone rubber heating mats,silicone  Rubber  Heaters with aluminum plate 

have  wire-wound  or etched  foil  heating  elements  protected  by fiberglass-reinforced  silicone rubber  vulcanized  and  compressed  at  high  temperature  and  press.They  are  thin,

bendable  and  shaped  to  fit  almost  any  equipment.  Heat  can  be  applied  to  the most  complex  shapes,  geometries,  curves  and  pipes  conceivable  without

sacrificing  efficiency  or dependability.

Technical  Parameters:
1 ）Maximum  temperature  resistance  of  insulator：250℃
2 ）Maximum  operation  temperature： 200℃
3 ）Insulation  Resistance：≥500  MΩ/DC  1000V
4 ）Breakdown  Voltage：≥  AC1500v/5S
5 ）Capacity  Tolerance：±5%
6 ）Temperature  range:  -60℃—250℃  continuous  heating;  Heating  element:  Available  with  either
etched  foil  or  wire-wound  elements:
7 ）Dimension:Maximum  1.2m×Xm    Minimum  15mm×15mm;  Thickness  1.5mm（Thinnest  0.8mm，
Thickest  4.5mm）Lead  wire  Length:Standard  130mm.

INSTALLATION:
1 ） with  backing  PSA  (Pressure  Sensitive  Adhesive  or  called  self  adhesive,  self  stick  adhesive)
as  3M  PSA
2 ） with  vulcanization  or  curing  and  compression  at  high  temperature  and  press
3 ） with  spring  and  hole  or  eyelet
4 ） with  clamps

BENEFITS:
1 ）Heating  evenly,accurate  and  adjustable
2 ）various  shapes,  holes,  cutouts,  profiled  watt  densities  and  multiple  voltages
3 ）Put  heat  exactly  where  it  is  required
4 ）High  dielectric  strength,  flexibility,  bendable  and  cost  effectiveness.
5 ）Resistance  to  temperature  extremes,  moisture,  weathering,  radiation,  fungus  and  chemical
attack
6 ）Heat  can  be  applied  to  the  most  complex  shapes,  geometries,  curves  and  pipes  conceivable
without  sacrificing  efficiency  or  dependability.
7 ）Easily  bonded  and/or  mechanically  mounted,  even  onto  the  curving  surface.

APPLICATION:
1)  Thermal  developing  in  graphic  imaging  or  heating  transfer  printing  equipment;
2)  Prevent  condensation  in  motors  or  instrument  cabinets;
3)  Freeze  or  condensation  prevention  in  housings  containing  electronic  equipment,
for  examples:  liquid  battery,traffic  signal  boxes,  automatic  teller  machines,  temperature  control
panels,  gas  or  liquid  control  valve  housings
4)  Composite  bonding  processes
5)  Semiconductor  process  heating
6)  Food  service  equipment
7)  Airplane  engine  heaters  and  aerospace  industry
8)  Drums  and  other  vessels  and  viscosity  control  and  asphalt  storage
9)  Medical  equipment  such  as  blood  analyzers,  medical  respirators,  test  tube  heaters,  etc.
10)  Curing  of  plastic  laminates
11)  Computer  peripherals  such  as  laser  printers,  duplicating  machines

Notes:  Voltage,wattage,size  and  shape  can  be  customized.(as  cone,ellipse  shape  etc.)

Technical parameters:

The temperature range is - 60 ℃ - 250 ℃ for long-term heating. There are two kinds of heating cores: high resistance alloy wire and metal etching foil. The withstand voltage of the insulating layer is 20-50kv / mm2, which can be used safely.

1) Maximum temperature resistance of insulating material: 300 ℃

2) Maximum operating temperature: 250 ℃

3) Insulation resistance: ≥ 500 m Ω / DC 1000V

4) Compressive strength: ≥ ac1500v / 5S

5) Power deviation: ± 5%

6) With PT100 temperature detector, it can accurately feel the surface temperature of heating film

7) Max. 1.2m × XM min 15mm × 15mm thick 1.5mm (thinnest 0.8mm, thickest 4.5mm) lead length: Standard 130mm, which can be specially customized beyond the above dimensions.

Note: it can be customized according to the voltage, power, specification and product shape required by users (such as oval, cone, etc.).

Installation method: due to different shapes, this product is installed and used by pressing, double-sided adhesive pasting, punching and positioning, room temperature vulcanization and other methods according to the actual site. The safe life is as long as five years